Manage static IP addresses#
Each static IP address will incur a small charge
By default an Aiven service will use public IP addresses allocated from the cloud provider’s shared pool of addresses for the cloud region. As a result, Aiven service IP addresses cannot be predicted. This is a good approach for most use cases, but we do also offer static IP addresses should you need them. This allows you to configure a firewall rule for your own services.
Learn more about static IP addresses at Aiven.
Calculate the number of IP addresses needed#
Work out how many IP addresses your service will need to guarantee that the service has enough static IP addresses available to handle upgrades and failures. The table below shows how to calculate the number of IP addresses needed, depending on the size of your service plan.
IP addresses needed
up to 6 nodes
double the number of nodes
3 node plan needs 6 static IP addresses (2 * 3 nodes)
number of nodes + 6
9 node plan needs 15 static IP addresses (9 nodes, plus 6)
Reserve static IP addresses#
Create a static IP addresses using the Aiven CLI, repeat as many times as you need to create enough IP addresses for your service. Specify the name of the cloud that the IP address should be created in, to match the service that will use it.
avn static-ip create --cloud azure-westeurope
The command returns some information about the newly created static IP address.
CLOUD_NAME IP_ADDRESS SERVICE_NAME STATE STATIC_IP_ADDRESS_ID ================ ========== ============ ======== ==================== azure-westeurope null null creating ip359373e5e56
When the IP address has been provisioned, the state turns to
list of static IP addresses in the current project is available using the
static-ip list command:
avn static-ip list
The output shows the state of each one, and its
ID, which you will need in the next step.
CLOUD_NAME IP_ADDRESS SERVICE_NAME STATE STATIC_IP_ADDRESS_ID ================ ============= ============ ======= ==================== azure-westeurope 18.104.22.168 null created ip359373e5e56 azure-westeurope 22.214.171.124 null created ip358375b2765
Once the status shows as
created IP address can be associated with a
Associate static IP addresses with a service#
Using the name of the service, and the ID of the static IP address, you can assign which service a static IP should be used by:
avn static-ip associate --service my-static-pg ip359373e5e56 avn static-ip associate --service my-static-pg ip358375b2765
When you have the required number of addresses available, you can enable static IP addresses on your service.
Configure service to use static IP#
Enable static IP addresses for the service by setting the
avn service update -c static_ips=true my-static-pg
This leads to a rolling forward replacement of service nodes, similar to applying a maintenance upgrade. The new nodes will use the static IP addresses associated with the service
Once the nodes have been replaced, they will be using the static IP addresses that you
associated with the service. You can check which ones are in use by running the
avn static-ip list command again. The
available state means that the IP
is associated to the service, and
assigned means that it is in active use.
Remove static IP addresses#
To dissociate an IP from a service, the service must either have enough IP addresses
still available, or the
static_ips configuration setting for the
service must be set to
Static IP addresses are removed by first dissociating them from a service,
while they are not in use. This returns them back to the
created state to
either be associated with another service, or deleted.
avn static-ip dissociate ip358375b2765
To delete a static IP:
avn static-ip delete ip358375b2765
delete commands return any information on